7 Things Your Painter Should Know Before Starting Your House Painting Project
Painting interior walls is the easiest way to freshen up your place. But this project can quickly turn into a nightmare if you’re not careful. Paint colors can dramatically change the mood and interior design of your home. It can make a statement with splashes of bold color, or it can be a soft backdrop to a more muted interior.
Either way, painting is one of the easiest and least expensive tools in the home care section while maintaining the house. However, there are a few things you should make sure that your painter knows before he starts painting.
Prep the Surface
A successful paint job starts with properly preparing the surface you’re going to paint. That means you must scrape sand, patch, and fill every hole, crack, dent, and surface imperfection. This isn’t the fun part of painting a room, but it is the most important part. No paint, regardless of its cost, color, thickness, or manufacturer’s claims, will hide a pockmarked or cracked surface.
Tint the Primer
Priming walls and ceilings is mandatory whenever you’re painting new drywall or painting over a dark color. But it’s smart to prime any time you paint. Primer serves three main functions. First, it blocks stains from bleeding through. Second, it allows one-coat coverage for the paint. Third, and most important, it improves paint adhesion, which greatly reduces blisters and peeling. This trick greatly enhances the ability of the topcoat to completely hide the primed surface.
Prep Your Roller and Paint Brushes
Rollers are made from fuzzy material that puts more than paint on your walls. It is important that you remove any debris, such as loose fibers, from the roller. You should also rub the dry paint brushes up against your hand and gently tug on the fibers. This will ensure that no loose fibers end up in your paint from the brush.
Pay Attention to the Finish You Choose
Surprisingly, not only does the color matter, but the finish, does as well. High gloss paint finishes are very durable and easier to clean, but the downside is they often highlight imperfections in your walls. On the other hand, a flat paint finish will hide these imperfections. However, flat paint is more susceptible to damage. In most instances, an eggshell finish is the best option. It provides some gloss, is still easy to clean, does not highlight imperfections, and is not as easily prone to damage as flat paint.
Tape and Set Up a Staging Area
In order to avoid the amateur mistake of smearing paint, along your baseboards and windowsills, tape off these areas before you start. Set up a staging area in the center of the room or just outside it for pouring paint, storing open paint cans, and cleaning brushes and rollers. This will cut down on spills and accidents, or at least keep them contained to one designated area. Also, it would be a great time saver in terms of looking for misplaced brushes or rollers.
If you’re done painting for the day but still have more to do tomorrow, you don’t have to go through the laborious process of cleaning your paintbrushes and paint-roller sleeves. Instead, simply brush or roll off the excess paint, then tightly wrap them in plastic food wrap.
Use soap and water to clean latex paint off the brush immediately after painting. If the paint dries on the brush, you’ll need special solvents to remove it. For oil-based paints, you’ll need a solvent such as paint thinner or mineral spirits. Moist paintbrushes can be wrapped in plastic or waxed paper and sealed with a rubber band or aluminum foil.
Selecting a right painting services for your home is definitely not an easy task. There are lot of factors involved before trusting someone with your house, and that’s why a professional painting company is always recommended.